Skip to content

Cold plunges

The best cold plunge chillers, sized for your tub.

Standalone chillers compared on cooling power, watts, lowest temperature and what you still have to buy.

WATER HELD AT 50F CHILLER AIR 70F IN A GARAGE, 90F ON A PATIO

We may earn a commission if you buy through our links, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. How this worksSpecs checked on

The best cold plunge chiller for most DIY tubs is the Active Aqua 1/4 HP: 3,010 BTU an hour on 460 W, enough to pull 100 gallons down 20F in about 5.5 hours before heat leaking in. For a chiller with the pump and filter built in, pick the Active Aqua Outdoor 1/3 HP, which reaches 39F. For a chiller built into the tub, the Renu Vero carries a 0.8 hp unit.

New to chillers? Two things to know first.

A chiller is a small refrigeration unit. Water is pumped out of the tub, through the chiller and back, so you never buy ice.

Size it in BTU, not horsepower
BTU per hour is how much heat the chiller removes. Horsepower only describes the motor. Two 1/3 hp chillers can cool at different speeds. Size one for your gallons
Check what is in the box
Some chillers are a bare cooling unit: you add a pump, hoses and a filter. Others include all three. See what each one includes
More words on this page, explained: BTU, hp, pull-down, GFCI, micron
BTU
A unit of heat: what it takes to change one pound of water by 1F. A gallon of water weighs 8.34 lb.
hp
Horsepower, the size of the compressor motor. The chillers here run from 1/10 hp to 1 hp.
Pull-down
The first cool-down from tap temperature to your target. It is the hardest job a chiller does; holding the temperature afterwards takes far less.
GFCI
The safety outlet or plug with Test and Reset buttons. It cuts the power if electricity leaks, which matters around water.
Micron
How fine a filter is. A 20 micron cartridge catches particles about a quarter the width of a human hair.

Chiller sizer: how long each one takes to cool your tub

Heat to remove: 16,680 BTU. Cooling and draw are maker figures. Time to cool is the best case, and power used is the electricity for that one cool-down.

ChillerCoolingDrawTime to coolPower usedBuy
Active Aqua 1/4 HP (AACH25HP)3,010 BTU/h460 W5.5 h$0.47Check price on Amazon
Active Aqua 1/2 HP (AACH50HP)4,020 BTU/h510 W4.1 h$0.39Check price on Amazon
Active Aqua 1 HP (AACH100HP)10,050 BTU/h1,100 W1.7 h$0.33Check price on Amazon
Active Aqua 1/10 HP (AACH10HP)1,020 BTU/h190 W16 h$0.57Check price on Amazon
Defaults: 100 gal from 70F to 50F, at 18.31 cents per kWh.
How we calculated this

BTU to remove = gallons x 8.34 x (water now - target)
hours = BTU to remove / chiller BTU per hour
power cost = watts / 1,000 x hours x price per kWh

8.34
lb per US gallon of water (gallon); water gives up 1 BTU per lb per F (EIA).
BTU per hour and watts
The maker's comparison chart on the Amazon listing for the Active Aqua line, read on Oct 9, 2026. The chart does not say at what water and air temperature the figures were measured.
Best case
The sum leaves out heat leaking into the tub while it cools, and a chiller removes less heat as the water gets colder. Expect longer in a warm garage or with the lid off.
Price per kWh
18.31 cents (EIA, US residential average, July 2026).
01Our picks

Which cold plunge chiller should you buy?

For most DIY tubs we pick the Active Aqua 1/4 HP, which removes 3,010 BTU an hour on 460 W and is the only budget line that publishes both numbers. If you want the pump and filter in the box, pick the Active Aqua Outdoor 1/3 HP. We chose each pick on published cooling power, watts, lowest temperature and warranty.

  • DIY value: Active Aqua 1/4 HP. 3,010 BTU an hour, 460 W, titanium evaporator. You add a pump, hoses and a filter. Check price on Amazon
  • Pump and filter built in: Active Aqua Outdoor 1/3 HP. Cools to 39F, built-in pump and a washable filter, rainproof housing and a GFCI power cord. Check price on Amazon
  • Lowest power draw: Pod Company Standard Chiller. 280 W, a 20 micron filter and hoses in the box. Check price on Amazon
  • Big tubs and fast cool-downs: Active Aqua 1 HP. 10,050 BTU an hour on 1,100 W: 100 gallons down 20F in about 1.7 hours, best case. Check price on Amazon
  • Coldest setting: Pod Chiller 2.0. Cools to 37F with app control, at 780 W. Check price on Amazon
  • Chiller built into the tub: Renu Vero. A 0.8 hp chiller inside the step of an upright tub, $7,000. Nothing to plumb.

We have not tested these chillers by hand. Every number below links to the maker's page or listing, or shows our arithmetic. How we research explains the method.

Talk to your doctor before you start. Sudden cold raises breathing rate, heart rate and blood pressure, and a cardiologist quoted by American Heart Association News cautions against it for anyone with a cardiac history. Cleveland Clinic advises avoiding water below 40F and suggests 50 to 59F for beginners. Never plunge alone.

02Sizing

What size chiller do you need for a cold plunge?

Size a chiller by BTU per hour against your gallons: 100 gallons dropped 20F is 16,680 BTU of heat to remove. A 3,010 BTU per hour chiller does that in about 5.5 hours and a 10,050 BTU per hour chiller in about 1.7. Horsepower alone does not tell you this, so look for the BTU figure.

Hours for the first cool-down of 20F (for example 70F tap water to 50F), best case, for the four Active Aqua sizes: 1,020, 3,010, 4,020 and 10,050 BTU per hour, from the maker's comparison chart on the Amazon listing for the Active Aqua line.
WaterHeat to remove1/10 hp1/4 hp1/2 hp1 hp
60 gal (small pod or barrel)10,008 BTU9.8 h3.3 h2.5 h1.0 h
100 gal (most tubs)16,680 BTU16 h5.5 h4.1 h1.7 h
150 gal (large or stock tank)25,020 BTU25 h8.3 h6.2 h2.5 h
How we calculated this

hours = gallons x 8.34 x degrees to drop / chiller BTU per hour

Example: 100 x 8.34 x 20 = 16,680 BTU. 16,680 / 3,010 = 5.5 hours. The sum leaves out heat that leaks in while the tub cools, and the chart does not state the test conditions, so treat these as the fastest you will see.

The first cool-down is the hard part

Once the water is cold, the chiller only has to remove the heat that leaks in through the walls and the lid. That is why a small chiller on an insulated, covered tub can hold a temperature it took all night to reach. If you plan to switch the chiller off between uses, size for the cool-down. If you leave it on, a smaller unit and a good lid will do.

Why the 1/10 hp is too small

The smallest Active Aqua is rated for a 10 gallon reservoir on the maker's chart. On 100 gallons it would need about 16 hours for a 20F drop in the best case, and in a warm garage the heat leaking in can match what it removes. It is in the sizer above so you can see the gap.

03Compared

How do the standalone chillers compare?

The standalone chillers split into two kinds: bare cooling units that publish their BTU, and kits that include a pump, filter and hoses but publish only watts. The Active Aqua titanium line is the first kind. The Active Aqua Outdoor unit and both Pod Company chillers are the second.

Specs as published on each maker's page or Amazon listing, read on Oct 9, 2026. We do not show Amazon prices because they change through the day.
ChillerMotorCoolingDrawLowest tempIn the boxWarrantyBuy
Active Aqua AACH25HP1/4 hp3,010 BTU/h460 Wnot publishedChiller only. Pump and hoses required, not included.not publishedCheck price on Amazon
Active Aqua AACH50HP1/2 hp4,020 BTU/h510 Wnot publishedChiller only1 yearCheck price on Amazon
Active Aqua AACH100HP1 hp10,050 BTU/h1,100 Wnot publishedChiller only1 yearCheck price on Amazon
Active Aqua Outdoor AACHO33HP1/3 hpnot publishednot published39FBuilt-in pump, washable filter, two water adaptors, GFCI cord1 yearCheck price on Amazon
Pod Company Standard Chiller1/3 hpnot published280 W41F on the Amazon listing, 39F on the maker's pageHoses, fittings, 20 micron filternot publishedCheck price on Amazon
Pod Company Pod Chiller 2.01/3 hpnot published780 W37FHoses, 20 micron filter, app control1 year per the maker's bundle pageCheck price on Amazon

Where the cells come from: the Active Aqua cooling and watts are from the maker's comparison chart on the 1/4 hp listing, and the warranty lines are from the 1/2 hp and 1 hp listings. The outdoor unit's figures are from its listing, and the Pod Company figures from the Standard Chiller and Pod Chiller 2.0 listings and the maker's own pages.

Two things the listings get wrong or leave out

  • One watts figure is copied across sizes. The technical details box on the 1/10 hp and 1 hp Active Aqua listings shows 510 W, the 1/2 hp figure. The maker's own chart on the same page gives 190 W and 1,100 W, so we use the chart.
  • Two lowest temperatures for one chiller. Pod Company's standard chiller reads 41F on Amazon and 39F on the maker's site. Plan on 41F.

What a bare chiller still needs

A bare unit such as the Active Aqua 1/4 hp is a box with a water inlet and outlet. You supply a pump to push water through it, hoses, and a filter so the pump and evaporator stay clean. The listing names the maker's own pump models that match each size. If that sounds like a project you do not want, pick a unit with the pump and filter built in.

04Built in

Should you buy a tub with the chiller built in?

Buy a tub with a built-in chiller if you want one warranty, one plug and no hoses on the floor. You pay for it: built-in tubs here start at $7,000, while a chiller and tub kit starts at $599. The three below cover both ends, and each publishes its chiller size.

Built in, upright

Renu Vero

For a small footprint where the chiller should disappear.

The Vero hides a 0.8 hp chiller inside its entry step, next to a 42 by 33 inch upright tub. Renu's cut sheet gives 1,080 W at peak cooling and, more usefully, an average of 240 W over 24 hours holding 40F. That average works out to about $385 a year at 18.31 cents per kWh (240 x 24 x 365 / 1,000 x $0.1831).

The body carries 5 years and the chiller 1 year. On Oct 8, 2026, Renu's page showed the Vero as sold out, shipping in 8 to 12 weeks.

What owners report

I changed the filter. It is not crystal clear.

Renu Therapy product page , reviewer John C., Verified Buyer, 5 stars

Their knowledge and quick response truly make them an asset to Renu.

Renu Therapy product page , reviewer Frances G., Verified Buyer, 5 stars

Built in, premium

Renu Cold Stoic 3.0

For buyers who want the chiller's watts and noise in writing.

A 0.5 hp chiller inside a 70 by 33 inch cabinet: 518 W cooling, 1,013 W heating, 37 to 104F and 58 dB at about 3 feet, all on Renu's product page. Renu sells an extended chiller warranty for $499.99 on top of the 1 year that comes with it. Our Renu Therapy review compares it with the Vero and the lie-down Aurelius.

Chiller and tub kit

Plunge Chill MAX

For the cheapest way to get a chiller and a tub that match.

A 1/3 hp chiller sold with a 148 gallon foldable tub, with a 2 year warranty on both under the maker's store-wide policy. The chiller sits beside the tub on hoses, so it is a kit and not a true built-in, but you do not have to match parts yourself.

What owners report

Chiller is very quiet and easy to use. The fittings take a little effort to get tight and prevent from leaking.

Trustpilot

Very happy with my Plunge chill max bundle! Tub is a good size and the chiller was easy to set up and my temperature stays right at 48°

Trustpilot
05Running cost

What does a cold plunge chiller cost to run?

A cold plunge chiller costs at most its rated watts running nonstop: $1.23 a day for a 280 W unit and $4.83 a day for an 1,100 W unit at the US average power price. A healthy chiller switches off once the water is cold, so real bills sit well under this ceiling.

If the chiller never switched off: rated watts x 24 hours at 18.31 cents per kWh (EIA, US residential average, July 2026).
ChillerRated drawkWh a dayA dayA year
Active Aqua 1/10 hp190 W4.6$0.83$305
Pod Company Standard Chiller280 W6.7$1.23$449
Active Aqua 1/4 hp460 W11.0$2.02$738
Active Aqua 1/2 hp510 W12.2$2.24$818
Pod Company Pod Chiller 2.0780 W18.7$3.43$1,251
Active Aqua 1 hp1,100 W26.4$4.83$1,764

Two makers publish an average instead of a ceiling. Renu's cut sheets give 130 W averaged over 24 hours for the Aurelius and 240 W for the Vero, both holding 40F. Those are about $209 and $385 a year. No maker of a standalone chiller on this page publishes an average, and we found no owner who has posted a meter reading.

A bigger chiller is not always dearer to run. It finishes the cool-down sooner and then rests. What moves the bill most is how much heat gets into the tub: the lid, the insulation and the air temperature around it.

06What goes wrong

What goes wrong with cold plunge chillers?

The chiller is the part of a cold plunge that fails most often in the owner reports we collected, and it usually carries the shortest warranty. Most chillers here are covered for 1 year. Read the chiller warranty separately from the tub warranty before you pay.

These reports are about chillers built into tubs, because that is where owners post in detail. The lesson carries over: a chiller that stops cooling, or one that never stops running, is the failure to plan for.

The chiller stopped being able to read its own temperature, and ran nonstop until I noticed. Which caused my energy bills to spike to a high of $722 per month.

Trustpilot

I bought an All-In Plunge in 2024. It has leaked since the day it was installed, and it still leaks.

Trustpilot

About 18 months in, chiller broke down, and their only solution is to buy a new one.

Trustpilot

During the warranty period, I reported recurring flow issues, airlocks, and deterioration of fittings.

Trustpilot

Before you order: a checklist to copy

  1. Gallons in my tub, filled to where I sit: ____
  2. Degrees I need to drop (warmest tap water minus my target): ____
  3. BTU to remove = gallons x 8.34 x degrees: ____
  4. Chiller BTU per hour (ask the seller if it is not listed): ____
  5. Hours for the first cool-down = BTU to remove / BTU per hour: ____
  6. Is a pump included? Hoses? A filter? What size are the replacement cartridges?
  7. Lowest temperature the maker states, and the highest air temperature it is rated for.
  8. Rated watts or amps, and whether the outlet I plan to use has GFCI protection.
  9. Is it rated for rain, or does it need cover?
  10. Chiller warranty in years, who pays shipping for a repair, and the return window.
  11. Where the warm air will go: the chiller needs clear space around it.

07Gear

What else does a chiller setup need?

A floating thermometer comes first: it shows the real water temperature, so you can tell when a chiller's own reading has drifted. Keep spare filter cartridges in the size your chiller takes, a water treatment made for plunge tubs, and a mat under wet feet beside the tub.

  • Floating ice bath thermometer

    A floating thermometer on a string, made for checking the water temperature in tubs and ice baths.

    Check price on Amazon
  • 20 micron chiller filter cartridges (10 x 2.5 in)

    Spare cartridges in the common 10 by 2.5 inch size. Check your chiller housing size before you order.

    Check price on Amazon
  • Ouster cold plunge water treatment

    A weekly water treatment made for cold plunge tubs to help keep the water clear between changes.

    Check price on Amazon
  • KMAT waterproof standing mat

    A cushioned, non-slip, waterproof mat to stand on beside the tub.

    Check price on Amazon

We picked these on reviews and fit, not commission.

08Questions

Questions people ask

What size chiller do I need for a cold plunge?

Work from BTU. Multiply gallons by 8.34 and by the degrees you want to drop, then divide by the chiller's BTU per hour. For 100 gallons dropped 20F that is 16,680 BTU: about 5.5 hours on a 3,010 BTU per hour (1/4 hp) chiller and about 1.7 hours on a 10,050 BTU per hour (1 hp) chiller, before heat leaking in.

Do you need a chiller for a cold plunge?

Not to start. Ice works, and a basic pod plus bagged ice is the cheapest trial. A chiller makes sense if you plunge most days or live somewhere warm: cooling 70 gallons from 80F to 50F takes about 108 lb of ice each time. Our best cold plunge guide has an ice or chiller calculator that shows when a chiller pays back.

Can you use an aquarium or hydroponic chiller for a cold plunge?

Yes, with extra parts. The Active Aqua chillers are sold for hydroponics and their Amazon listings now name cold plunge use, but the 1/4 hp listing says a pump and hoses are required and not included. You also need a filter, since these units do not clean the water. Their lowest temperature is not published on the listing.

What is the most reliable cold plunge chiller?

No maker or reviewer publishes failure rates, so nobody can say on data. What you can compare is the warranty: 1 year on the Active Aqua chillers and on Renu's built-in chillers, 2 years store-wide at Plunge Chill, and 3 years on the BlueCube DROP's chiller. Renu sells an extended chiller warranty for the Cold Stoic 3.0.

How much does a cold plunge chiller cost to run?

The ceiling is the rated watts running nonstop. A 280 W chiller would cost $1.23 a day and a 460 W chiller $2.02 a day at the US average of 18.31 cents per kWh. A working chiller switches off once the water is cold, so expect a fraction of that, less with an insulated lid.

How cold does a cold plunge chiller get?

Makers of the units on this page state 37F to 41F as the lowest setting: 37F for the Pod Chiller 2.0 and Renu's tubs, 39F for the Active Aqua Outdoor chiller, and 39F or 41F for the Pod Company standard chiller depending on which page you read. Cleveland Clinic suggests 50 to 59F for beginners.

Can you add a chiller to a bathtub?

Pod Company says its universal chiller works with any bathtub, with hoses that hang over the rim. Remember that a household tub has no lid and no insulation, so the chiller runs more, and the water still needs filtering and treating if you keep it for more than one use.

Where should a cold plunge chiller sit?

Somewhere with air around it, because a chiller moves heat out of the water and blows it into the room. The Active Aqua Outdoor listing says to place the chiller below the tub's water level and rates it for air up to 86F. Outdoors, use a unit that is rated for rain and plug it into a GFCI outlet.

NextThe best cold plunges by what they cost to keep coldTubs compared on chiller power, yearly running cost, lowest temperature and documented failures.Compare plunges NextRenu Therapy cold plunges, reviewed on the numbersCold Stoic 3.0, Vero and Aurelius compared on price, power, running cost, warranty and what owners report.Read the guide

Sources

  1. gallon. en.wikipedia.org
  2. EIA. eia.gov
  3. EIA, US residential average, July 2026. eia.gov
  4. American Heart Association News. heart.org
  5. Cleveland Clinic. health.clevelandclinic.org
  6. maker's page. podcompany.com
  7. 780 W. podcompany.com
  8. cut sheet. cdn.shopify.com
  9. Renu Therapy product page , reviewer John C., Verified Buyer, 5 stars. renutherapy.com
  10. product page. renutherapy.com
  11. extended chiller warranty. renutherapy.com
  12. store-wide policy. plungechill.com
  13. Trustpilot. trustpilot.com
  14. Trustpilot. trustpilot.com
  15. 148 gal. plungechill.com
  16. EIA, US residential average, July 2026. eia.gov
  17. Trustpilot. trustpilot.com
  18. Trustpilot. trustpilot.com
  19. Trustpilot. trustpilot.com
  20. Trustpilot. trustpilot.com